Icarsoft HD1 Truck diagnose

Artikkelnr.: HD1 616245679736

Rask og enkel feilkodeleser for Lastebil og Buss. Tilfredstiller kravene på PKK Kontrollpunkt 0.2 og 8.2.1.2

NOK4 368,75 inkl. mva.
  • Produktinfo
  • Produktanmeldelser (0)

Rask og enkel feilkodeleser for Lastebil og Buss. Tilfredstiller kravene på PKK Kontrollpunkt 0.2 og 8.2.1.2.

Heavy Duty Diagnostic Tool HD 1 er det perfekte verktøyet for diagnosering og sletting av feilkoder. Den dekker protokoller som: J1587, J1708 og J1939 protokol. Dette for å kunne dekke motor, girkasse, bremser og mer.
Testeren har en 2,8" full LCD farge skjerm og er ergonomisk, brukervennlig og lett å ha med seg.

For mer avansert diagnose av Lastebil, buss, hengere etc se Jaltest som vi også leverer:
https://www.obd2.no/butikk/diagnose/jaltest-1

 

OBDII Function
1. Read Codes
2. Erase Codes
3. I/M Readiness -- I/M Readiness indicates whether or not the various emissions-related     systems on the vehicle are operating properly and are ready for Inspection and     Maintenance testing.
4. Data Stream
5. Freeze Frame -- When an emission-related fault occurs, certain vehicle conditions are     recorded by the on-board computer. This information is referred to as freeze frame data.     Freeze Data is a snapshot of the operating conditions at the time of an emission-related     fault.
6. O2 Sensor Test -- This option allows retrieval and viewing of O2 sensor test results for most     recently performed tests from the vehicle´s on-board computer.
7. On-Board Monitoring -- This function can be utilized to read the results of on-board     diagnostic monitoring tests for specific components/systems.
8. Evap System Test -- The EVAP test function lets you initiate a leak test for the vehicle´s     EVAP system. Before using the system test function, refer to the vehicle´s service repair     manual to determine the procedures necessary to stop the test.
9. Vehicle Information -- The option displays the vehicle identification number (VIN), the     calibration verification number (CVN), and other information of the test vehicle.
10.Retrieve generic (P0, P2, P3, and U0), manufacturer specific (P1, P3, and U1) codes and     pending codes
11.Turn off Check Engine Light (MIL), clear codes and reset monitors
12. Read live PCM datastream 
13. Support CAN (Controller Area Network) and all other
14.Multilingual menu and DTC definitions- English, Spanish, and German, etc
15.Read pending DTCs
16.Read permanent DTCs
17. DTCs search
18.Tested data

 

Skriv en produktanmeldelse og del dine erfaringer med dette produktet med andre kunder.